Isithombe Esifakiwe Esidwetshwe Ngokhuni Olungabonakali Olumelana Nomlilo Esisekelwe Emanzini

Upende Wokhuni Olungabonakali Olumelana Nomlilo Osekelwe Emanzini

Incazelo emfushane:

1, Kunjaloupende osekelwe emanzini onezingxenye ezimbili, engenazo izinyibilikisi ze-benzene ezinobuthi neziyingozi, futhi enobungane nemvelo, iphephile futhi inempilo;
2, Uma kwenzeka umlilo, kwakheka ungqimba lwekhabhoni olunwetshiwe olunjengesiponji olungashi, oludlala indima yokuvikela ukushisa, ukuvikela umoya-mpilo, kanye nokuvikela ilangabi, futhi lungavimbela ngempumelelo isisekelo ukuthi sivuthe;
3, Ubukhulu bengubo bungalungiswangokwezidingo zesithambisi somlilo. Isici sokunwebeka sesendlalelo sekhabhoni singafinyelela izikhathi ezingaphezu kwe-100, futhi isendlalelo esincane singasetshenziswa ukuthola umphumela owanelisayo wesithambisi somlilo;
4, Ifilimu yopende inokuqina okuthile ngemva kokomiswa, futhi ayikwazi ukusetshenziswa ezindaweni ezithambile kakhulu futhi ezidinga ukugotshwa njalo.

Sithumelele i-imeyili

IMINININGWANE ENGEZIWE

*Ividiyo:

*Izici Zomkhiqizo:

1. Okuqukethwe kwe-VOC okuphansi, upende osekelwe emanzini;
2. Ayishisi, ayiqhumi, ayinabo ubuthi, ayingcolisi,ukwakhiwa okulula, futhiukomisa ngokushesha;
3. Ukucaca okuphezulu, ukuxubha i-substrate ngeke kuthinte ukubukeka nokuthungwa kwe-substrate, kodwa kuzojulisa kancane umbala wokuqala;
4. Kuyikufanelekile ukusetshenziswa endliniUma kuzosetshenziswangaphandle, kuyadingeka ukwenza ukwelashwa okungangeni manzi ebusweni bokumboza.

*Ukusetshenziswa Komkhiqizo:

Izinkuni ezithambile/eziqinile ezinobukhulu obungaphezu kuka-10mm, kanye neminye imikhiqizo yezakhiwo zezinkuni, njenge-plywood, amakhadibhodi, ibhodi lokuvikela i-fiber kanye ne-plywood enobukhulu obungaphezu kuka-12mm.

*Ukwakhiwa Komkhiqizo:

Lo mkhiqizo u-A, Bisembozo esingashisi esisekelwe emanzini esinezingxenye ezimbiliUma usebenzisa, hlanganisa izingxenye u-A no-B ngokulinganayo ngesilinganiso sesisindo esingu-1:1, bese uxubha, ugoqe, ufafaze noma ucwilise.
Kunconywa ukwakha endaweni lapho izinga lokushisa elizungezile lingaphezu kuka-10C kanye nomswakama ongaphansi kuka-80%.
Uma kudingeka ukuxubha kaningi, kudingeka izikhawu zamahora angu-12-24 noma ngaphezulu. Ngemva kokuba izingxenye ze-AB zixutshwe, zizoqina kancane kancane. Uma udinga ukuzisebenzisa kancane, kunconywa ukuthi uqale ukupenda ngokushesha ngemva kokulungiselela. Ngemva kokuqina, ungangeza inani elincane lamanzi ukuze ulinciphise: uma udinga ukugqoka okujiyile, kunconywa ukuthi ukushiye imizuzu eyi-10-30, ngemva kokuphakama kwe-viscosity bese upenda, kulula ukuliqinisa.
Ukumbozwa: 0.1 mm ubukhulu, kunganwebeka kube ungqimba lwekhabhoni oluyi-1 cm, kunwebeke izikhathi eziyi-100.

*Isitoreji kanye nokuthuthwa:

1. Izimbozo kufanele zigcinwe endaweni epholile, enomoya futhi eyomile ku-0°C-35°C, kude nokushisa nemithombo yomlilo.
2. Lo mkhiqizo awunabo ubuthi, awushisi futhi awuqhumi, futhi wenziwa ngokwemithethonqubo evamile yokuthutha izinto.
3. Isikhathi sokugcina esisebenzayo siyizinyanga eziyi-12, futhi izinto ezingaphandle kwesikhathi sokugcina zingaqhubeka nokusetshenziswa ngemva kokudlula ukuhlolwa.

*Ukwelashwa kobuso:

Izinga lokushisa lobuso besisekelo kanye nendawo ezungezile liphakeme kune-10°C, hhayi ngaphezu kwe-40°C, kanti umswakama ohlobene awuphakeme kune-70%;
Isisekelo sesakhiwo sokhuni kumele somile futhi singabi nothuli, uwoyela, i-wax, amafutha, ukungcola, i-resin nezinye izinto ezingcolisayo;
Kukhona izimbozo ezindala ebusweni ezidinga ukususwa ngokuphelele;
Ukuze kube nobuso besakhiwo sokhuni esimanzi, sidinga ukupholishwa ngephepha lokusanti, kanti umswakama wesakhiwo sokhuni ungaphansi kuka-15%.

*Isimo Sokwakha:

Ngesikhathi sokwakha, izinyathelo zokuvikela ukuphepha komuntu siqu kufanele zithathwe ngokuqinile, futhi indawo kufanele igcinwe inomoya omuhle. Uma ingena esikhumbeni ngengozi, yihlanze ngamanzi ahlanzekile ngesikhathi. Uma ingena emehlweni ngengozi, hlanza ngamanzi amaningi ngesikhathi bese uyithumela kudokotela.
Ngaphambi kokupenda, zonke izinhlobo zamabala nothuli ebusweni be-substrate kufanele kuhlanzwe, futhi i-substrate kufanele yome ngokuphelele ngaphambi kokupenda, ukuze ingathinti ukunamathela kwefilimu yokupenda.
Upende olungiselelwe ongashi uzoqina kancane kancane futhi ekugcineni uqine. Kunconywa ukuthi usebenzise okuningi ngangokunokwenzeka ukuze ugweme ukuchithwa. Izingxenye ezingasetshenziswanga u-A no-B ezingu-3 kufanele zivalwe futhi zigcinwe ngesikhathi.
Ngemva kokuba umsebenzi wokwakha usuqediwe, amathuluzi okwakha angahlanzwa ngamanzi.