Upende Wokumaka Omgwaqo Owenziwe Nge-Acrylic Owomisa Ngokushesha Isithombe Esifakiwe

Upende Wokumaka Omgwaqo We-Acrylic Owomisa Ngokushesha Upende Womgwaqo Onemibala

Incazelo emfushane:

Yakhiwe nge-resin ye-acrylic, i-resin ekhethekile, i-pigment, i-filler kanye ne-organic solvent.

IMINININGWANE ENGEZIWE

*Ividiyo:

*Izici Zomkhiqizo:

★ Ifilimu yokupenda ineukubukeka okuyisicaba futhi ifilimu yokupenda iqinile;
★ Ukumelana nokucindezelwa kuphezulu futhiukumelana nesimo sezulu kuphakeme kakhulu;
★ Ukusebenza kokomisa kuyashesha; ukunamathela kuphezulu.
★ Umbala ogqamile futhi ohlala isikhathi eside; amandla amahle okufihla; ukunamathela okuhle;
★ Ukumelana okuhle nokugugulekaisikhathi esifushane sokomisa; Ingxenye eyodwa kulula ukuyakha;
★ Ihlala isikhathi eside futhi iqinile, ukumelana kahle namanzi nokugqwala.

*Ukusetshenziswa Komkhiqizo:

Kusetshenziswa kabanzi emigwaqweni, imigqa yethrafikhi, ama-workshop, izindawo zokugcina impahla, izinkundla zemidlalo kanye nezinye izindawo zokubeka umugqa. Upende wokumaka umgwaqo uvame ukuba mhlophe noma uphuzi wethrafikhi yansuku zonke, izindawo zethrafikhi ezithinta iminwe, kanye nezimpawu zethrafikhi. Lokhu kuhlanganiswa kunamathela kahle ku-asphalt, itshe noma usimende futhi kumelana nethrafikhi kanye nethonya lemvelo.

*Imininingwane Yobuchwepheshe:

Into	Idatha
Umbala kanye nokubukeka kwefilimu yopende	Imibala nefilimu ebushelelezi
Okuqukethwe Okuqinile, %	≥60
I-Viscosity (i-Stormer viscometer), KU	80-100
Ubukhulu befilimu eyomile, um	50-70
Isikhathi sokomisa (25 ℃), H	ukoma kwendawo≤10mins, ukoma okuqinile≤24hrs
Ukunamathela (indlela ebekwe eceleni), ikilasi	≤2
Amandla omthelela, kg, cm	≥50
Amandla okugoba, mm	≤5
Ukumelana nokuguguleka, i-Mg, 1000g/200r	≤50
Ukuzivumelanisa nezimo, mm	2
Ukumelana namanzi, amahora angama-24	Akukho senzakalo esingajwayelekile

I-GA/T298-2001 JT T 280-2004

*Isikhathi sokuphumula esiphindwe kabili:


Izinga lokushisa	5℃	25℃	40℃
Isikhathi esifushane kakhulu	2h	1h	Amahora angu-0.5
Isikhathi eside kakhulu	Izinsuku ezi-7

*Ukwelashwa kobuso:

Isisekelo sekhonkrithi sidinga okungaphezu kokuqiniswa kwemvelo ngemva kwezinsuku ezingu-28, okuqukethwe komswakama okungu-<8%, umhlabathi omdala ukuze kususwe ngokuphelele uwoyela, ukungcola kanye nokungcola, kugcinwe kuhlanzekile futhi komile futhi umhlabathi wonke imifantu, amalunga, i-convex kanye ne-concave kuphathwe ngendlela efanele (ukulinganisa i-putty noma i-resin mortar)

*Indlela yokwakha:

1. Upende wokumaka umgwaqo we-acrylic ungafuthwa futhi ubhulashwe/ugoqwe.
2. Upende kumele uxutshwe ngokulinganayo ngesikhathi sokwakha, futhi upende kufanele uxutshwe nge-solvent ekhethekile ukuze uqine ngokwanele ekwakheni.
3. Ngesikhathi sokwakha, indawo yomgwaqo kufanele yome futhi ihlanzwe uthuli.

*Isimo Sokwakha:

1, Izinga lokushisa eliyisisekelo alingaphansi kuka-5℃, umswakama ohlobene ongu-85% (izinga lokushisa kanye nomswakama ohlobene kufanele kulinganiswe eduze kwezinto eziyisisekelo), inkungu, imvula, iqhwa, umoya kanye nemvula akuvunyelwe ngokuphelele ukwakhiwa.
2, Ngaphambi kokupenda upende, hlanza indawo yomgwaqo embozwe ukuze ugweme ukungcola namafutha.
3, Umkhiqizo ungafuthwa, ubhulashwe noma ugoqwe. Kunconywa ukuthi ufafazwe ngemishini ekhethekile. Inani le-thinner licishe libe ngu-20%, i-viscosity yokusetshenziswa ingu-80S, ingcindezi yokwakha ingu-10MPa, ububanzi be-nozzle bungu-0.75, ubukhulu befilimu emanzi bungu-200um, kanti ubukhulu befilimu eyomile bungu-120um. Izinga lokumboza eliyinkolelo-mbono lingu-2.2 m2/kg.
4, Uma upende ujiyile kakhulu ngesikhathi sokwakhiwa, qiniseka ukuthi uwuncibilikisa ngendlela efanele nge-thinner ekhethekile. Ungasebenzisi i-thinner.