I-Metallic Car Paint Uv Resistant, I-Anti Corrosion Coating Spray Isithombe Esifakiwe

Metallic Car Paint Uv Resistant, Anti Corrosion Coating Spray

Incazelo emfushane:

Uchungechunge lokucwenga kabusha lwezendlalelo ezikabili noma izendlalelo ezintathufaka umbala okhanyayo okhanyayo, isiliva, ijazi lesisekelo sombala weparele, umphumela wensimbi usobala, ukoma ngokushesha, kulula ukuwenza.

I-substrate: Ingaphezulu lensimbi elisande futhi elihlanziwe noma zonke izinhlobo ze-Medium Primer;800-1000 sand paper wet-milling noma 400-600 sand paper dry ukugaya.

Thumela i-imeyili kithi

*Idatha Yobuchwepheshe:

Into	Idatha
Umbala	I-Fine Copper Pearl
Izinga lokuhlanganisa	2:1:0.3
Ukufafaza enamathela	2-3 izingqimba, 40-60um
Isikhawu sesikhathi(20°)	5-10 imizuzu
Isikhathi sokumisa	Indawo yomile imizuzu engama-45, iphucuziwe amahora ayi-15.
Isikhathi esitholakalayo (20°)	2-4 amahora
Ithuluzi lokufafaza nokusebenzisa	Geocentric spray gun(ibhodlela eliphezulu) 1.2-1.5mm;3-5kg/cm²
Ithuluzi lokufafaza nokusebenzisa	Isibhamu sesifutho sokumunca(ibhodlela eliphansi) 1.4-1.7mm;3-5kg/cm²
Ithiyori inani likapende	2-3 izendlalelo mayelana 3-5㎡/L
Impilo yesitoreji	Gcina iminyaka engaphezu kwemibili gcina esitsheni sokuqala.

*Izici Zomkhiqizo:

• Ukomisa okusheshayo kanye nezakhiwo ezinhle zokulevelisa kuqinisekisa.
•Ukuzinza okuhle okuqondile nokunamathela.
•Ithuthukiswe ukuze yakhe indawo eqinile yokupenda ngaphambili yazo zonke izinhlobo zezinhlelo zokucwenga izimoto.
•Nikeza ukunamathela okuhle phakathi kwamajazi kanye nezakhiwo ezinhle zesihlabathi.

*Uhlelo Lomkhiqizo:

1, Kusebenza kumapende aphakathi agaywe phansi futhi ahlanzwa, upende wangempela noma indawo yopende engu-2K eqinile.Futhi izinto ezithambile ezisekelwe nge-insulating layer.

2, Ingasetshenziselwa ukufafaza ingxenye yezimoto ezintsha noma ukulungisa izimoto ezindala.

*Ukwelashwa komhlaba:

Ifilimu kapende endala eqinisiwe yapholishwa, indawo engaphezulu kufanele yome futhi ingabi nakungcola okufana namafutha.

*Umbandela Wokwakha:

1.Izinga lokushisa eliyisisekelo alikho ngaphansi kuka-5°C, umswakama ohlobene ongu-85% (izinga lokushisa kanye nomswakama ohlobene kufanele ulinganiswe eduze nendawo eyisisekelo), inkungu, imvula, iqhwa, umoya nemvula akuvunyelwe ngokuphelele ukwakha.

2.Ngaphambi kokudweba upende, hlanza indawo eboshwe ukuze ugweme ukungcola namafutha.

3.Umkhiqizo ungafafazwa, kunconywa ukuthi ufefe ngemishini ekhethekile.Ububanzi be-nozzle buyi-1.2-1.5mm, ubukhulu befilimu bungama-40-60um.

*Indlela yokwakha:

1.Fafaza ngangokunokwenzeka, amacala akhethekile angaba i-brush coating;

2.Upende kufanele uhlanganiswe ngokulinganayo ngesikhathi sokwakhiwa, futhi upende kufanele uhlanjululwe nge-solvent ekhethekile ku-viscosity edingekayo ekwakheni.

3.Ngesikhathi sokwakha, indawo engaphezulu kufanele yome futhi ihlanzwe ngothuli.

4.Fafaza izingqimba ezi-2-3, zingapholishwa ngemuva kwamahora ayi-15.