I-Acrylic Enamel Lacquer Thinner Car Paint Mixing Car Paint With Thinner

Incazelo emfushane:

Ikhwalithi ephezulumncane, eyenzelwe ngokukhethekilei-primer, i-basecoat kanye ne-topcoat, Itholakala ngesivinini esisheshayo, esijwayelekile, esinensayo futhi esinensayo esengeziwe ukuze ihambisane nemikhiqizo ehlukene kanye nohlelo lokusebenza oluhlukile .Ukunciphisa i-viscosity,ukusiza ukulinganisa kanye nokwenza lula izidingo zokufinyeza.

Thumela i-imeyili kithi

*Imininingwane yobuchwepheshe:

Into	Idatha
Umbala	Okusobala
Izinga lokuhlanganisa	2:1:0.3
Ukufafaza enamathela	2-3 izingqimba, 40-60um
Isikhawu sesikhathi(20°)	5-10 imizuzu
Isikhathi sokumisa	Indawo yomile imizuzu engama-45, iphucuziwe amahora ayi-15.
Isikhathi esitholakalayo (20°)	2-4 amahora
Ithuluzi lokufafaza nokusebenzisa	Geocentric spray gun(ibhodlela eliphezulu) 1.2-1.5mm;3-5kg/cm²
Ithuluzi lokufafaza nokusebenzisa	Isibhamu sesifutho sokumunca(ibhodlela eliphansi) 1.4-1.7mm;3-5kg/cm²
Ithiyori inani likapende	2-3 izendlalelo mayelana 3-5㎡/L
Impilo yesitoreji	Gcina iminyaka engaphezu kwemibili gcina esitsheni sokuqala.

*Izici Zomkhiqizo:

. Inika amandla ukulungiswa okusheshayo okusebenzayo
.Yehlisa ukonakala kopende
. Ukuguquguquka kwemishini yokomisa
.Ukusetshenziswa kahle kwezinto

*Uhlelo Lomkhiqizo:

1, Kusebenza kumapende aphakathi agaywe phansi futhi ahlanzwa, upende wangempela noma indawo yopende engu-2K eqinile.Futhi izinto ezithambile ezisekelwe nge-insulating layer.

2, Ingasetshenziselwa ukufafaza ingxenye yezimoto ezintsha noma ukulungisa izimoto ezindala.

*Ukwelashwa komhlaba:

Ifilimu kapende endala eqinisiwe yapholishwa, indawo engaphezulu kufanele yome futhi ingabi nakungcola njengamafutha.

*Indlela yokwakha:

1.Fafaza ngangokunokwenzeka, amacala akhethekile angaba i-brush coating;

2.Upende kufanele uhlanganiswe ngokulinganayo ngesikhathi sokwakhiwa, futhi upende kufanele uhlanjululwe nge-solvent ekhethekile ku-viscosity edingekayo ekwakheni.

3.Ngesikhathi sokwakha, indawo engaphezulu kufanele yome futhi ihlanzwe ngothuli.

4.Fafaza izingqimba ezi-2-3, zingapholishwa ngemuva kwamahora ayi-15.

*Umbandela Wokwakha:

1.Base izinga lokushisahhayi ngaphansi kuka-5°C,umswakama ohlobene ongu-85% (izinga lokushisa kanye nomswakama ohlobene kufanele ulinganiswe eduze nendawo eyisisekelo), inkungu, imvula, iqhwa, umoya nemvula akuvunyelwe ngokuphelele ukwakha.

2.Ngaphambi kokudweba upende,hlanza indawo eboshiweukugwema ukungcola namafutha.

3.Umkhiqizo ungafafazwa, kunconywa ukuthi ufefe ngemishini ekhethekile.Ububanzi be-nozzle buyi-1.2-1.5mm, ubukhulu befilimu bungama-40-60um.